New Arrivals Aluminum Shell Emergency Driver
Product Description
★ Lithium-ion cell: The Li-ion battery 18650 3.7V 2400mAH could be the recharge and discharge cycle more than 500 times and provide 2 hours emergency battery time for the LED lights.
★ Compatibility:The Led Emergency Kit is specialized for the 3-40W all the kind of LED lamps, example for ceiling light, downlight, strip light. It has a wide voltage range AC85-265V that turns on the emergency power supply when the main power cut-off.
★ Aluminum Alloy + ABS:The material of aluminum alloy + ABS is used for the LED Emergency Driver battery backup housing because it could be good at heat dissipation and also has coated against corrosion typically maximize safety for the Led Emergency Inverter. And the aluminum shell emergency driver uses the aluminum material because the weight is lighter than others.
★ Protection:Overcharged and dis-charged protection, short circuit protection, overload protection that's our team owned design and developed for the LED Emergency Module. There are make sure the LED emergency backup power to use safely many times.
★ Warranty:If any failure within 3 years warranty of the Led Inverter, we'll offer free replacement or refund.
Product Specification
Product Name | Led Light With Emergency Backup |
Item Number | FAT- LED- F1A-2 |
Power | 3- 40W |
Battery | Lithiumn-ion 18650 3.7V 2400mAH |
Emergency Time | More than 2 hours |
Emergency Power | 3- 5W |
Charge Time | Less than 24 hours |
Input Voltage | AC85- 265V; 50/60HZ |
Output Voltage | DC12V- 160V |
Battery Cycle Time | 500 times |
Emergency Switch time | 0.2S |
Operation Temp | -5℃- 45℃ |
Protection Degree | IP30 |
Warranty | 3 Years |
Size | 130 x 55 x 21 mm |